Researchers unlock 'materials genome', opening possibilities for next-generation design

July 04, 2024

SRO is sometimes likened to the ‘materials genome’, the arrangement or configuration of atoms within a crystal. "Our research presents a significant breakthrough in materials science," said Professor Ringer, a materials engineer in the School of Aerospace, Mechanical and Mechatronic Engineering (AMME). There is lots more to do on various aspects of the analysis of SRO—it’s a hard problem, but this is an important step forward,” said Professor Ringer. Critically, the study enhances the capabilities of researchers to computationally simulate, model and ultimately predict materials behaviour because SRO provides the detailed atomic-scale blueprint. A patent application by Professor Ringer is partly related to this work.

Simulated atomic environments. Image: Simon Ringer, Mengwei He and researchers.

In a paper published today in Nature Materials, researchers from the University of Sydney’s School of Aerospace, Mechanical and Mechatronic Engineering introduced a new way to decode the atomic relationships within materials.

The breakthrough could assist in the development of stronger and lighter alloys for the aerospace industry, new generation semiconductors for electronics, and improved magnets for electric motors. It could also enable the creation of sustainable, efficient and cost-effective products.

The study, led by University of Sydney Pro-Vice-Chancellor (Research Infrastructure) Professor Simon Ringer, harnessed the power of atom probe tomography (APT) to unlock the intricacies of short-range order (SRO). The SRO process is key to understanding the local atomic environments essential for development of innovative materials which could underpin a new generation of alloys and semiconductors.

SRO is sometimes likened to the ‘materials genome’, the arrangement or configuration of atoms within a crystal. This is significant because different local atomic arrangements influence the electronic, magnetic, mechanical, optical, and other properties of materials, which have a bearing on the safety and functionality of a range of products.

Until now, SRO has been challenging for researchers to measure and quantify because atomic arrangements occur at a scale so small that they are difficult to see with conventional microscopy techniques.

The new method using APT, developed by Professor Ringer’s team, overcomes these challenges, paving the way for advances in materials science that could have far-reaching implications across steels for ship hulls and custom silicon for electronics in a range of industries.

"Our research presents a significant breakthrough in materials science," said Professor Ringer, a materials engineer in the School of Aerospace, Mechanical and Mechatronic Engineering (AMME).

"Beyond crystal structure and symmetry, we wanted to know more about the atomic-scale neighbourhood relationships within the crystal—are they random, or non-random? If the latter, we want to quantify that. SRO gives us this information in detail, opening up vast possibilities for materials that are custom-designed, atom-by-atom, with specific neighbourhood arrangements to achieve desired properties like strength."

The study focused on high entropy alloys, which are promising for various advanced engineering applications.

“These alloys are the subject of an enormous worldwide research effort because of the interest in using them in situations requiring high-temperature strength, such as in jet engines and power plants, as well as for neutron irradiation shielding in nuclear reactors, where protection against radiation damage is necessary,” said Professor Ringer.

The team used advanced data science techniques drawing on data from APT —a sophisticated imaging technique that visualises atoms in 3D, allowing the team to observe and measure SRO, comparing how it changes in alloys under different processing conditions.

The research focused on observations of a cobalt-chromium-nickel high entropy alloy, revealing how different heat treatments can change SRO.

“This provides a template for future studies in which SRO controls critical material properties. There is lots more to do on various aspects of the analysis of SRO—it’s a hard problem, but this is an important step forward,” said Professor Ringer.

Dr Mengwei He, postdoctoral research fellow in the School of Aerospace, Mechanical and Mechatronic Engineering said:

"The ability to measure and understand short-range order has transformed our approach to materials design. It gives us a new set of eyes to see how small changes at the atomic level architecture can lead to giant leaps in materials performance."

Critically, the study enhances the capabilities of researchers to computationally simulate, model and ultimately predict materials behaviour because SRO provides the detailed atomic-scale blueprint.

Senior postdoctoral fellow Dr Andrew Breen said: “We have demonstrated that there are regimes where the SRO really can be measured using atom probe tomography.  Not only have we pioneered an experimental approach and computational framework to measuring SRO, we have produced a sensitivity analysis that bounds the precise range of circumstances whereby such measurements are valid, and where they are not valid.”

Dr Will Davids, who completed his doctorate with Professor Ringer and now works for engineering firm Infravue said: “This is an exciting advance because we’ve shown that SRO measurements are possible in multicomponent alloys, which will no doubt be of benefit to the materials science and engineering community. The community are now going to want to learn how to further expand the measurable regime of SRO, so a big space in this research field has just opened up.”

Disclosure

The research was supported by the Australia Research Council’s (ARC) Discovery Program. The team also acknowledge support from the Australia–US Multidisciplinary University Research Initiative (AUSMURI) program supported by the Australian Government. The team acknowledge technical and scientific support for experiments conducted at the following research facilities: Sydney Microscopy and Microanalysis (SMM), Sydney Analytical, Sydney Informatics Hub and Sydney Manufacturing Hub. SMM is a foundational node of Microscopy Australia, the NCRIS supported national microscopy facility. This research team are all members of the School of Aerospace, Mechanical and Mechatronic Engineering in the Faculty of Engineering, and are members of the Australian Centre for Microscopy & Microanalysis. A patent application by Professor Ringer is partly related to this work.

The team’s research paper, ‘Quantifying short-range order using atom probe tomography’, is published in Nature Materials.

The source of this news is from University of Sydney

Popular in Research

1

Jul 7, 2024

Scientists use generative AI to answer complex questions in physics

2

Jul 7, 2024

First language song book a hit in the APY Lands

3

Jul 7, 2024

Navigating longevity with industry leaders at MIT AgeLab PLAN Forum

4

Jul 7, 2024

Dismissed and discharged: health systems still failing people with poor mental health

5

Jul 7, 2024

Elaine Liu: Charging ahead

Biden’s ABC Interview Was a Necessary Appointment With the Public — and a Botched One

Jul 7, 2024

No “Serious Condition”: Watch Biden Tell George Stephanopoulos Of Debate Debacle In First Clip From ABC Interview

Jul 6, 2024

American Air, Gate Gourmet Face Pressure on Contracts to Avoid Strikes

Jul 7, 2024

MSN

Jul 7, 2024

NYU Dentistry Names Implant Dentistry Fellowship in Recognition of Major Gift from Alumni Noel Liu and Nazish Jafri

Jul 7, 2024

Biden Aides Provided Questions in Advance for His Radio Interviews

Jul 7, 2024