Postdoc Position: In Situ Micromechanical Investigation Of Solids Under Extreme Conditions M/W

5 Nov 2023

Job Information

Organisation/Company

CNRS

Department

Laboratoire Georges Friedel

Research Field

Engineering » Materials engineering

Physics » Acoustics

Researcher Profile

Recognised Researcher (R2)

Country

France

Application Deadline

25 Nov 2023 - 23:59 (UTC)

Type of Contract

Temporary

Job Status

Full-time

Hours Per Week

35

Offer Starting Date

1 Jan 2024

Is the job funded through the EU Research Framework Programme?

Not funded by an EU programme

Is the Job related to staff position within a Research Infrastructure?

No

Offer Description

Micro- and nanomechanical testing is a novel emerging field in materials science. Countless research groups have already thoroughly investigated deformation of bulk materials, where the smooth deformation is enabled by the presence of dislocations in large numbers inside the samples. Materials' response to external deformation fundamentally differs from bulk as the sample size is reduced. During compression of these so-called micro- and nanopillars, deformation happens in localized, distinctive slip bands that create inhomogeneous surface features. These features (also referred to as slip bands) appear as a result of inter-mittent, sudden strain bursts, that produce jerky, stochastic stress-strain curves. It has been determined that the yield strength exhibits inverse dependency on the size when micropillars were examined in this regime (also referred to as "size effect"). If hydrogen is present in the solid (i.e. by wet electrochemical processes, introduced during manufacturing / environmental exposure or after contact with high pressure gaseous H), it can cause embrittlement or enhanced cracking, when the material is subjected to stress. This would eventually lead to the reduced lifetime or critical failure of the component. Although it is known for a long time that hydrogen causes degradation of mechanical performance in metals, the microscale mechanisms remain a subject of debate. To gain knowledge on how the presence of hydrogen modifies dislocation nucleation and mobility, interactions between phase and grain boundaries, in operando experimental investigations require high spatial resolution.

The objective of this post-doctoral work is to develop new methodologies for measuring the micromechanical response of solids under extreme conditions by exploiting FIB micromachining for the manufacture of dedicated specimens. The fellow will aims at paving the way towards mechanical characterization of materials subjected to extreme environmental conditions at small scales. These extremities include high strain rates (HSR, up to 10^4 s-1) and temperatures varying between cryogenic (down to -150°C) up to medium ranges (room temperature to ~400°C). In particular, the work aims to study materials' characteristics in the hydrogen context. 1. Participation in the development of the H-charging cell. The fellow will contribute to the rigorous testing of the developed in situ H-charging cell, that can be operated under ambient and vacuum conditions, simultaneously with the nanodeformation stage. 2. Development of micromechanical tests of the alternating tension/compression and fatigue type on the micron scale to study surface layers (i.e. thin films). This work will require the micromechanical device of Mines Saint-Etienne, where current developments allow the deployment of high-frequency tests compatible with cyclic stresses of compression/traction/fatigue types. 3. Application to surface layers. The objective will be to apply all the developed methods on materials of interest to project INSTINCT (i.e. materials subject to hydrogen embrittlement, coatings). From an academic point of view, the objective will be to study the correlation between the state of residual stress, the microstructure and behaviour of the material in compression, bending, traction and fatigue.

The Host Institution: The research groups at LGF (SURF and PMM) are experts in the fields of metallurgy, mechanics of materials and surface functionality (i.e. against corrosion). They are committed to designing the new generation of metallic materials in relation to the use of new manufacturing processes and surface treatments. The LGF laboratory is involved in the Manutech network, which aims to put the Lyon-St-Etienne region at the forefront of surface manufacturing and tribology.

What we offer: Cutting-edge training in mechanics and materials; a stimulating and enriching research and teaching program, a large international network with the best scientists in the field (EMPA-Thun, MPIE, KIT Karlsruhe, …). The fellow will have access to the latest micromechanical equipment (high/low temperature modules, ultra-highspeed deformation) coupled with versatile characterization (in situ high (angular) resolution EBSD, in situ Acoustic Emission) techniques, and a dual beam FIB/SEM system dedicated to micro- sample preparation. In case of an early start, the fellow can participate in a large-scale facility measurement at the ESRF ID11 (Feb. 2024) to study hydrogen-related effects in porous stainless steel samples.

Requirements

Research Field

Engineering

Education Level

PhD or equivalent

Research Field

Physics

Education Level

PhD or equivalent

Languages

FRENCH

Level

Basic

Research Field

Engineering » Materials engineering

Years of Research Experience

1 - 4

Research Field

Physics » Acoustics

Years of Research Experience

1 - 4

Additional Information

Eligibility criteria

Requirements: • PhD degree, or (be close to acquiring it) in mechanics/materials • Skills in mechanics of materials and mechanical testing, electron microscopy characterization • Affinity for numerical simulation and programming • Good level of English • Ability to work in a team • Spirit of synthesis / editorial quality The candidate must provide a detailed CV, a motivation letter, a PhD certificate (or the expected defence date), the PhD Thesis with a list of publications, a letter of recommendation and a “research sketch” (proposing your ideas on the desired research within the framework of INSTINCT, in max. 1 paragraph). More info: www. micromechanics.fr

Website for additional job details

https: // emploi.cnrs.fr/Offres/CDD/UMR5307-SZIKAL-001/Default.aspx

Work Location(s)

Number of offers available

1

Company/Institute

Laboratoire Georges Friedel

Country

France

City

ST ETIENNE

Where to apply

Website

https: // emploi.cnrs.fr/Candidat/Offre/UMR5307-SZIKAL-001/Candidater.aspx

Contact

City

ST ETIENNE

Website

https: // www. mines-stetienne.fr/lgf/

STATUS: EXPIRED